Design,simulation, elaboration and luminescence of Tb3+-doped Ba0.84Gd0.16F2.16 fluoroaluminosilicate scintillating glass ceramics

Extensive researches on scintillators have been executed to satisfy the excellent radiation detection materials in broad applications. However, practical application of conventional scintillators is limited due to the limitations of high cost, time-consuming fabrication process and insufficient radioluminescence. Herein, high density precursor glass doped with Tb³⁺ was designed to absorb X-ray efficiently and produce green emission. Molecular dynamics simulation was used to simulate the phase separation process in melting process. Then, Tb³⁺-doped Ba_0.84Gd_0.16F_2.16 glass ceramics (GCs) with excellent structural and optical properties were elaborated by melt quenching technic and further heat treating. Their structural properties, photoluminescence (PL) and X-ray excited luminescence (XEL) were explored detailedly. The internal quantum efficiency of PL is 64 % in GCs. The XEL intensity is 192 % of that of Bi₄Ge₃O₁₂ (BGO) commercial scintillator. Our results suggest that Ba_0.84Gd_0.16F_2.16:Tb³⁺ GCs might have potential application in X-ray detection.     

Direct writing of textured ceramics using anisotropic nozzles

Direct writing is a unique means to align anisotropic particles for the fabrication of textured ceramics by templated grain growth (TGG). We show that alignment of tabular barium titanate (BT) template particles (20–40 μm width and 0.5–2 μm thickness) in a PIN-PMN-PT matrix powder (d₅₀ = 280 nm) is significantly improved during direct writing using anisotropic nozzles at high printing rates. The particle orientation distribution in as-printed filaments, and the texture orientation distribution in sintered ceramic filaments are shown to directly correlate with COMSOL Multiphysics-predicted torque distributions for direct writing with aspect ratio 2, 3 and 5 oval nozzles. Electromechanical strain properties of the textured piezoelectric ceramics significantly improved relative to random ceramics when printed with anisotropic nozzles. Simulations of aspect ratio 20 nozzles and nozzles with interior baffles demonstrate significantly increased torque and near elimination of constant shear stress cores (i.e. plug flow).     

New optical ceramics: High-entropy sesquioxide X2O3 multi-wavelength emission phosphor transparent ceramics

Highly transparent X₂O₃ sesquioxide ceramics were obtained from a solid solution of five different oxides (Lu₂O₃, Y₂O₃, Yb₂O₃, Gd₂O₃, and Dy₂O₃), mixed in an equal molar ratio according to the principle of high-entropy. The fabricated (Lu, Y, Yb, Gd, Dy)₂O₃ ceramics achieved 99.97 % of the relative density and exhibited a high degree of optical transparency with the in-line transmittance of almost 80 % in the visible wavelength range. Emissions of Gd³⁺ (⁶P_J → ⁸S_7/2 at 312 nm), Dy³⁺ (⁴F_9/2 → ⁶H_15/2 at 492 nm and ⁴F_9/2 → ⁶H_13/2 at 572 nm), and Yb³⁺ (²F_5/2 → ²F_7/2 at 1031 nm) suggested a potential application of the high-entropy ceramics as multi-wavelength emission phosphor transparent ceramics. High-entropy ceramics also exhibited lower specific heat and thermal conductivity compared to single-element sesquioxide ceramics. This work demonstrated that highly transparent oxide ceramics, with complex chemical compositions and good optical properties, could be obtained using the high-entropy principle.     

LaCr0.7Fe0.3O3-NiMn2O4 supported NTC composite ceramics with a sandwich-like structure

A novel sandwich-like structure was first proposed to adjust the electrical properties of NTC thermistors. The LaCr_0.7Fe_0.3O₃-NiMn₂O₄ supported composite ceramics with sandwich-like structure were initially fabricated via traditional solid-state reaction and uniaxial pressing methods, which allowed for the advantages of each component to be integrated into one material. X-Ray diffraction analysis indicates the ceramics mainly consisting of orthorhombic perovskite LaCr_0.7Fe_0.3O₃ and cubic spinel NiMn₂O₄ phases. SEM images manifest that the three layers adhered well to each other and exhibited high density. For electrical properties, the ρ_25°C was expanded to a wide range of 1182–110,233 Ω?cm and could be adjusted to the desired values by tuning the volume ratio of two basic layers, the B value was enhanced from 3358 K to 4167 K by NiMn₂O₄, and the thermal stability was improved by LaCr_0.7Fe_0.3O₃ with a resistance shift less than 0.55 % after annealing at 150 °C for 1500 h.     

Pressure-induced transparency of MgO,Al2O3, AlN,and cBN ceramics at room temperature

The in situ axial X-ray diffraction patterns of four ceramic powder samples (MgO, Al₂O₃, AlN, and cBN) that were compressed in a diamond anvil cell under uniaxial non-hydrostatic conditions were recorded. The microscopic deviatoric stress as a function of the pressure was determined from the X-ray diffraction peak broadening analysis: the curves increased approximately linearly with the pressure at the initial compression stage and then levelled off under further compression. Pressure-induced transparency was observed in all of the samples under compression, and the pressure at the turning point on the curves of the microscopic deviatoric stress versus pressure corresponded to the pressure at which the samples became transparent. Analysis of the microstructural features of the pressure-induced transparent samples indicated that the compression caused the grains to fracture, and the broken grains bonded with each other. We demonstrated that the ceramics’ pressure-induced transparency was a process during which the grains were squeezed and broken, the pores were close between the grains, and the broken grains were re-bonded under compression.     

Competitive growth of Al2O3/YAG/ZrO2 eutectic ceramics during directional solidification: Effect of interfacial energy

The microstructure evolution and growth behavior of the Al₂O₃/Y₃Al₅O₁₂(YAG)/ZrO₂ ternary eutectic ceramics during directional solidification were well investigated. During directional solidification of the Al₂O₃/YAG/ZrO₂ ternary eutectic ceramics, {} Al₂O₃ paralleled with {001}ZrO₂ while they did not parallel with {001}YAG at the same time in the competitive growth stage. All of the interfaces parallel to each other finally. The area percentage of the Al₂O₃/ZrO₂ and YAG/ZrO₂ interfaces are 40.4 ± 0.2% and 30.8 ± 0.1%, respectively, higher than that of the Al₂O₃/YAG (28.8 ± 0.2%). The content of Al₂O₃ and YAG phases are 39.9% and 41.1%, respectively, almost double of that of ZrO₂. The interfaces of Al₂O₃/ZrO₂ and YAG/ZrO₂ are shorter and more dispersed than that of the Al₂O₃/YAG. It was found that the interfacial energy of Al₂O₃/ZrO₂ and YAG/ZrO₂ interfaces are lower than that of Al₂O₃/YAG. It can be concluded that interfacial energy plays a decisive role in affecting the crystallographic orientation and interfaces distribution in the Al₂O₃/YAG/ZrO₂ eutectic since the interfaces of Al₂O₃/ZrO₂ and YAG/ZrO₂ with lower interfacial energy can be formed more easily during directional solidification. Therefore, the contents of Al₂O₃/ZrO₂ and YAG/ZrO₂ interfaces are higher. This study can provide theoretical guidance for interface design of multi-phase materials.     

Bond characteristics,vibrational spectrum and optimized microwave dielectric properties of chemically substituted NdNbO4

Coordination chemistry, bond state and vibrational spectrum of co-substituted microwave dielectric NdNb_1-x(Zr_0.5W_0.5)_xO₄ ceramics (x = 0.01∼0.05) were investigated. Raman spectra and XRD refinement showed a solid solution was formed. The compressed and elongated chemical bonds are responsible for the variations of crystal parameters and cell volume. Calculated chemical bond parameters indicated bond covalency, lattice energy and Nb-site bond energy act on the fluctuations of the permittivity, quality factor and temperature coefficient, respectively. Meanwhile, the infrared vibrational spectrum is fitted to quantify the contributions of observed IR mode to the intrinsic loss. Compact ceramic possesses excellent properties: ε_r ∼ 19.2, Q × f ∼ 55282 GHz and τ_f ∼ -11.36 ppm/°C with x = 0.04, at 1250°C.     

Fabrication,microstructural characterization and gas permeability behavior of porous silicon nitride ceramics with controllable pore structures

Porous Si₃N₄ ceramics with monomodal and bimodal pore structure were prepared by cold isostatic pressing and freeze-casting, respectively. Both the pore structure and permeability behavior of the porous Si₃N₄ ceramics were tailored by altering the pressure of cold isostatic pressing and the composition and content of solvent during freeze-casting. The specimens obtained by cold isostatic pressing exhibited smaller Darcian and non-Darcian permeability than those of freeze-casted samples due to their lower open porosity, smaller pore size and higher tortuosity. On the other hand, compared with the ice-templated specimens having the same solvent volume in the ceramic slurries as them during freeze-casting, the emulsion-ice templated samples showed smaller open porosity, macropore size and Dacian permeability, but the similar non-Darcian permeability because of their larger micropores and better pore interconnectivity.     

Preparation of transparent Y2O3 ceramic via gel casting: Realization of high solid volume via surface modification

In this article, isocyanate was adopted to modify Y₂O₃ powder for the purpose of preparing transparent Y₂O₃ ceramics via gel casting. The modification could enhance the hydration resistance of Y₂O₃ powder through the steric hindrance effect. The coating mechanism can be proved by the infrared spectrum of the surface-modified Y₂O₃ powder. Modification could not only prevent Y₂O₃ particles from reacting with water, but also prevents agglomeration between particles. The viscosity of the slurry with a solid content of 52.7 vol% is only 0.48 Pa·s at the shear rate of 100 s⁻¹, which is suitable for preparing high-density compacts by gel casting. The transmittance of the sample (1840°C × 8 h, 1 mm thickness) at 1100 nm reaches 75%. The microstructure of the sintered body is dense with the average grain size of 6.5 μm without obvious impurities nor pores. Five mol% ZrO₂-doped Y₂O₃ transparent ceramic fairing with the diameter of 5 cm without defects was successfully fabricated by gel casting (52.7 vol% solid volume) and vacuum sintering (1840°C × 8 h).     

Surface structure and quenching effects in BiFeO3-BaTiO3 ceramics

The structure and properties of Mn-doped 0.67BiFeO₃-0.33BaTiO₃ ceramics are systematically investigated with respect to the effects of annealing prior to rapid cooling by quenching in air. Air-quenching induces a change in crystal structure from pseudo-cubic to rhombohedral, with higher quenching temperatures leading to an increased rhombohedral distortion. These structural changes are correlated with the appearance of more well-defined ferroelectric domain configurations. It is shown that the surface preparation procedures for XRD measurements can induce significant changes in the peak profiles, indicating differences in crystal structure between the surface and bulk regions. Frequency dispersion in the temperature-dependent relative permittivity for the as-sintered sample is significantly reduced after quenching, accompanied by enhancement of the Curie point and improved temperature-stability of piezoelectric properties. It is proposed that the formation of defect clusters by A-site cation diffusion during cooling is circumvented by quenching, leading to the observed modification of structural distortion and ferroelectric properties.